Installing it properly, Leveling it – Whirlpool 3ET16NKXDG00 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Installing it properly

1. Allow 1.25 cm (Vi inch) space on each

side and at the top of the refrigerator for

ease of installation.

2. If the hinge side of the refrigerator is to be

against a wall, you might want to leave
extra space so the door can be opened
wider.

3. The refrigerator can be flush against the

back wall.

Leveling it

Your refrigerator has 2 front leveling

screws - one on the right and one on the
left. To adjust one or both of these, follow

the directions below.

1. Remove base grille. (See page 19.)

2. To raise front, turn screw clockwise.

3. To lower front, turn screw counterclock

wise.

4. Check with level.

5. Replace base grille. (See page 19.)

Right to