Whirlpool 3ET16NKXDG00 - Manual (Page 12)

Adjusting the utility compartment and tray
(on some models)
The utility compartment
arKl
tray slide from
one side to the other for more flexible
storage. The tray fits on either side of the
utility compartment or partially underneath it.
Experiment and find the positions that work
best for you.
To adjust the utility compartment or tray:
1. Lift the front slightly.
2. Slide to desired position.
3. Lower front to lock into place.
Adjusting the refrigerator shelves
Adjust the shelves to match the way you use
your refrigerator. Glass shelves are strong
ertough to hold bottles, milk, artd other
heavy food items.
Cantilever shelves
To remove a shelf:
1. Remove items from shelf.
2. Tilt shelf up at front.
3. Lift shelf at back.
4. Pull shelf straight out.
To replace a shelf:
1. Guide the rear shelf hooks into the slots
in the shelf supports on the back liner
wall.
2. Tilt front of shelf up until hooks drop into
slots.
3. Lower front of shelf to a level position.
Slide-out shelves
To remove the shelves:
1. Remove all items from the shelf.
2. Slide shelf straight out to the stop.
3. Lift the front slightly.
4. Slide shelf out the rest of the way.
To replace the shelves:
1. Fit back of shelf on top of guide with wire
stops on the bottom of the guide.
2. Lift the front.
3. Slide shelf in until it clears all stops.
Wire stop
Guide stop
SheK guide
NOTE: Glass shelves are heavy. Handle
them carefully.
STYLE 2