Whirlpool 3ET16NKXDG00 - Manual (Page 10)

Changing the control settings
• Adjust the Refrigerator Control first.
• Wait at least 24 hours between adjustments.
• Then adjust the Freezer Control if needed.
If you need to adjust temperatures in
refrigerator or freezer, use the settings listed
in the chart below as a guide.
RECOMMENDED
CONDITION: REASON: CONTROL SETTINGS:
Refrigerator
Freezer
Refrigerator • Door opened often
section • Large amount of food added 4 2
too warm • Room temperature too warm
Freezer • Door opened often
section • Large amount of food added e A,
too warm • Very cold room temperature
W
(can't cycle often enough)
Refrigerator • Controls not set correctly
section
too cold
for your conditions 2 4
Ice not • Heavy ice usage 4 4
made fast • Very cold room temperature
enough (can’t cycle often enough)
Both • Door opened often 4 4
sections • Large amount of food added
too warm •Very wann or very cold room
temperatures
Removing the drop-in door trim pieces
(on some models)
To remove the trim piece:
1. Remove all items from the shelf.
2. Pull straight up on the trim piece at each
end.
To replace the trim piece:
1. Locate each end of the trim piece above
the trim pocket opening.
2. Push the trim piece straight down until it
stops.
3. Replace items on the shelf.