Whirlpool 3ET16NKXDG00 - Manual (Page 15)

Style 2
Remove the meat drawer arid cover for
easier cleaning.
To remove the meat drawer:
1. Slide meat drawer out to the stop.
2. Lift the front of the meat drawer.
3. Slide meat drawer out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Remove meat drawer.
2. Push cover back to release the rear of the
cover from the shelf.
3. TiK cover up at the front.
4. Pull cover forward and out.
To replace the cover:
1. Fit notches and rear edge of cover over
rear and center crossbars on the shelf.
2. Lower cover into place.
3. Replace the meat drawer.
STYLE 2
Remove meat drawer before cover.
Removing the crispers and crisper cover
For your convenience, one crisper is slightly
larger than the other. This allows you to
store celery and other longer items in your
crisper.
To remove the crispers:
1. Slide crisper straight out to the stop.
2. Lift the front.
3. Slide out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Push up the cover insert from the bottom,
then slide out with both hands.
2. Lift front of cover frame.
3. Lift cover frame up and out.
To replace the cover:
1. Fit back of cover frame into notch sup-
F>orts on back wall of refrigerator, then
lower the front into place.
2. Slide back of cover insert into place, then
lower the front.
Remove the
cover Insert.
Lift the cover
front, then the
back.
NOTE: H
cover insert
is giass,
handie it with
care. H couid
be heavy.
Pull out to
the stop,
lift the
front, end
pull again.
14