Whirlpool 3ET16NKXDG00 - Manual (Page 17)

Adjusting the freezer shelf
Adjust the freezer shelf to match the way you
use your freezer.
To remove the shelf:
1. Lift entire shelf slightly.
2. Move shelf all the way to one side.
3. Tilt other side up and out of shelf support
cups.
4. Pull shelf up and out.
To replace the shelf:
1. Tilt the shelf and insert into freezer compart­
ment.
2. Insert one end of the shelf all the way into
the center of the shelf support cups.
3. Lower other end of shelf and insert into the
shelf support cups.
4. Lower shelf into place.
NOTE: The shelf should lower slightly and
lock into place. If the shelf does not appear
sturdy, make sure both ends of the shelf are
inserted into the shelf support cups.
Adjusting the haif-width freezer sheif
(on some models)
Adjust the shelf according to the space you
need in your freezer. Use the bottom position
when you don't need the shelf at all.
To adjust the shelf:
1. Remove items from the shelf.
2. Lift shelf up at front.
3. Pull shelf out to the stop.
4. Lift back of shelf.
5. Pull shelf out the rest of the way.
To replace the shelf:
1. Guide rear of shelf into desired guide.
2. Lift rear of shelf over stop.
3. Slide shelf in all the way.
4. Lower front into place.
16