Whirlpool 3ET16NKXDG00 - Manual (Page 20)

Removing the base grille
To ramovo th« baso grilla:
1. Open the refrigerator door.
2. Grasp the grille with both hands.
3. Push down on the top edge of the grille to
release the top clips.
4. Roll grille toward you to release top dips.
5. Pull grille away from the refrigerator.
NOTE: Do not remove the Tech Sheet
fastened behind the grille.
To replace the base grille:
1. Line up the edges of the grille with the
outside edges of the cabinet.
2. Roll the grille toward you.
3. Place the lower clips in the openings in
the metal panel.
4. Roll the grille toward the cabinet until the
top dips snap into place.
5. Close the refrigerator door.
See cleaning instrudions for defrost pan and
corKlenser coils on page 23.
Condenser Defrost
colls pan.
Clips
Changing the light bulbs
STYLE 1
^WARNING
Electrical Shock Hazard
Before removing a light bulb or renrroving
a light shield for cleaning, either unplug
the refrigerator or disconned the elec­
tricity leading to it at the main power
supply.
Failure to do so could resuK in electrical
shock.
To change refrigerator light:
1. Disconned refrigerator from power
supply.
2. Reach behind Control Panel to remove
bulb.
3. Replace with a 40-watt appliance bulb.
4. Reconned refrigerator to power supply.
19