Adjusting the crisper humidity controi, Adjusting the crisper cover track – Whirlpool 3ET16NKXDG00 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/663305/16/background.png)
Adjusting the crisper humidity controi
You can control the amount of humidity in
the moisture-sealed crispers. Adjust the
control to any setting between LOW and
HIGH.
• LOW (open) lets moist air out of the crisper
for best storage of fruits and vegetables
with skins.
• HIGH (closed) keeps moist air in the
crisper for best storage of fresh, leafy
vegetables.
£
Humldlb/ G>nl7ol
Adjusting the crisper cover track
Because your crispers are not the same size,
your crisper cover has an adjustable center
track so you can switch positions of the
crispers. You can adjust the center track with
the cover in the refrigerator by removing the
crispers and the cover insert.
To remove the center track:
1. Push up the cover insert from the bottom,
then slide out with both hands.
2. Gently pull up on front end of track.
3. Pull rear erxi of track out of opening in
cover.
To replace the center track:
1. Insert rear end of track (with hole) into
opening in cover.
2. Lower front erxl of track into slot.
3. Make sure rear end of track has sniipped
into place on urvder side of cover.
15