Mopar K6860631 - Manual (Page 11)

10
52. Engage the glove box (1) hinges to the instrument
panel.
53. Press the two glove box stops (2) and raise the glove
box upward.
54. Close the glove box.
55. Position the instrument panel center bezel (1) near the
IP and connect the wire harness connectors.
56. Install the instrument panel center bezel onto the IP
and fully engage the retainer clips.
57. Install the two lower screws (2).
58. If necessary, install the close out panel (2) or
cupholder and install the screws (3).
Aug 08, 2008 K6860631 Rev. 1