BASO BGD258 Series BASOTROL CE Approved Class A Gas Valve - Manual (Page 6)

6 BASOTROL CE Approved Gas Valve Installation Instructions
Technical Specifications (continued)
Agency Listings CSA (AGA/CGA) Certificate Number 229521-1656041
EC Type Examination Certificate Number EC-86/10/062
UL File Number MH5939
Australian Gas Association Certificate Number 7934
Specification
Standards EN 161
Standards Complying with EMC Directive
Standards Complying with Low Voltage Directive
Australian Standard AS 4629
ANSI Standard Z21.21
Canadian Standard CSA 6.5
UL Standard 429
Performance specifications are nominal and conform to acceptable industry standards. All agency certification of BASO products is performed
under dry and controlled indoor environmental conditions. Use of BASO products beyond these conditions is not recommended and may void
the warranty. Product must be protected if exposed to water (dripping, spraying, rain, etc.) or other harsh environments. The original
equipment manufacturer or end user is responsible for the correct application of BASO products. Consult BASO Gas Products LLC for
questionable applications. BASO Gas Products LLC shall not be liable for damages or product malfunctions resulting from misapplication or
misuse of its products.
Refer to the BGD258 Series CE Approved Gas Valve Product Bulletin (BASO-PB-BGD258) for necessary information on operating and
performance specifications of this product.
1007 South 12th Street
PO Box 170
Watertown, WI 53094
www.baso.com
1-877-227-6427 (1-877-BASOGAS) Printed in U.S.A.