BASO Q90 Series - Manual

Installation Instructions Q90
Issue Date September 20, 2012
© 2012 Johnson Controls, Inc. 1
Part No. BASO-INS-Q90, Rev. A www.baso.com
Q90 Series Pilot Burner Assembly Kit
Application
The Q90 pilot burner assembly kits are specifically
designed to replace certain ignition pilots on various
appliances. Refer to Table 1 for the proper pilot burner
assembly kit selection. Refer to Figure 1 through
Figure 5 for Q90 drawings.
Table 1: Q90 Pilot Burner Assembly Kit Information
Kit Part
Number
Pilot Burner
Part Number
Sensor Probe Part
Number
Sensor Cable
Part Number
Appliance
Manufacturer
Type of
Application
Q90AA-1 J989EKW-7721 Y75AA-8 N/A Lennox Residential Furnace
Q90BB-1 J996DKW-7723 Y75AA-3 Y57JH-27 Carrier-BDP Residential Furnace
Q90CC-1 J986HXW-7221* Integral Part of Pilot N/A Reznor Unit Heater
Q90DD-1 J993HHW-6221 Integral Part of Pilot Y57HH-36 Reznor Rooftop
Q90DD-2 J990HHW-6221 Integral Part of Pilot Y57HH-96 N/A N/A
Q90EA-1 J995DHW-6718 Y75AA-8 N/A Friedrich Residential Furnace
* J986HXW-7221 also replaces J992HXW-7221. (J986 has a Rajah terminal and boot, J992 does not.)
Top View
Side Views
J989EKW
Figure 1: Q90AA-1 (J989EKW) Pilot Burner
Top View
Side Views
J996DKW
Figure 2: Q90BB-1 (J996DKW) Pilot Burner