BASO BGD258 Series BASOTROL CE Approved Class A Gas Valve - Manual (Page 5)

BASOTROL CE Approved Gas Valve Installation Instructions 5
Technical Specifications
Product BGD258 Series BASOTROL CE Approved Class A Gas Valve
Types of Gas 2nd (Natural Gas), and 3rd (LP Gas) Family Gases
Permissible Ambient
(Surface) Temperature
-29 to 79°C (-20 to 175°F)
Electrical Ratings 12 VDC, 1.0A
25 VDC, 0.675A
25 VAC, 50/60 Hz, 0.595A
120 VAC, 50/60 Hz, 0.13A
240 VAC, 50/60 Hz, 0.063A
Rated Inlet Pressure North America:
Europe:
Australia: 2 psi
138 mbar
13.8 kPa
Maximum Working
Pressure (CE) 138 mbar
Reverse Pressure Ratings 150 mbar (15 kPa [60 in. W.C.]) Class A (EN 161); Class 1 (AS 4629)
Body Connections 3/8 or 1/2 NPT, 3/8 or 1/2 BSPP (Thread ISO 7-Rp), 3/8 or 1/2 BSPT (Thread ISO 7-Rc)
with Flange Connection Holes (M4 x 0.7 mm pitch x 6 mm deep)
Valve Torsion Group Group 2 (EN 161)
Pressure Connection 1/8 BSPP (Thread ISO 7-Rp), 1/8 BSPT (Thread ISO 7-Rc),
1/8 NPT Left-hand and/or Right-hand, or M5 x 0.8 Thread Bottom
Pilot Connections 1/8 BSPP (Thread ISO 7-Rp), 1/8 BSPT (Thread ISO 7-Rc),
1/8 NPT Left-hand and/or Right-hand or 1/4 in. cc Fitting Bottom
Dirt Strainer 0.9 mm (0.036 in.) Mesh (CE only or upon request)
Operating Time Rating 100% Continuous
Valve Timings Closing Time
Opening Time
Dead Time <1 Second
<1 Second
<1 Second
Power Ratings 15 VA per Coil (except 25 VDC, 17 VA)
Electrical Connections 3-Tab Solenoid Coil
2-Tab Solenoid Coil 2 x 6.35 mm (1/4 in) + 6.35 mm (1/4 in) Earth Ground
2 x 6.35 mm (1/4 in)
Coil Insulation Class Class F
Packaging Bulk pack supplied to original equipment manufacturer (individual pack optional).
Bulk Pack Quantity 30 per carton
Bulk Pack Weight 35 kg (77 lb) per carton