Avlink HX-2388 - Manual (Page 33)

Matrix Switching System—User Manual
32
Example 4: “STO” and “RCL” functions.
Key LCD Display Operation
1. Press the NO.2 key of
the output channel, then
the input channels will
begin to flicker.
2. Press the NO.1 key of
the Input channel.
3. Press the STO key on
the front panel. The Store
Memory begins to flicker
about 8 seconds.
4. Press the NO.1 key of
the output channel to
save the setting in the
NO.1 channel.
5. Press the ALL key on
the front panel, and then
press the OFF key to
cancel the setting.
6. Press the RCL key on
the front panel, The
Recall Memory begins to
flicker about 8 seconds.
7. Press the NO.1 key of
the output channel to
Load the previously
saving.