Avlink HX-2388 - Manual (Page 29)

Matrix Switching System—User Manual
28
7.0.3.3 LAN IP Function
Activation Function:
In the main configuration menu, select Options button to prop up the Windows Internet
Explorer dialog box, click “OK” to show the IP configuration screen as shown in Figure
7-11
Figure 7-13
In the Network Settings configuration, you can set the IP information by yourself (Fix IP)
or click the Enable DHCP check box to get the IP from the DHCP (Float IP).
) Click the Default button to restore to default IP address. After changing the IP, you
have to restart (power off then power on) the Device to make the changed values take
effectively.
) You can also use the blue Switcher on the rear panel of the Device to reset the
ignored IP.