Avlink HX-2388 - Manual (Page 30)

Matrix Switching System—User Manual
29
7.0.3.4 Other Application
The software utility will show you at least 32 units Device ID and Name. You can click the
Console down list to select which device that you want to configure output /input values
as Figure 7-14. The entire connected Device name will be showed on the Console List
as Figure 7-15. For this model, the software utility only shows an ID: 00 for the Name:
HX-2388 presently.
) When the Console List is empty, please pay attention to the location of switch 1 on
the rear panel of Device is correctly. Then, click Scan to research the configured Device.
For HX-2388 model, only have to make the Console down list value to “00”.
Figure 7-14 Figure 7-15