AltiGen MAXCS 7.0 Update 1 CDR - Manual (Page 6)

Hardware Requirements
2 CDR Manual
Hardware Requirements
• External database server should be at least Pentium 4, 1 GHz with
512M RAM. The following external CDR databases are supported:
• Microsoft SQL Server 2008
• Microsoft SQL Server 2008 Express
• Microsoft SQL Server 2005
• Microsoft SQL Server 2000
Important: Refer to “Limitations” for a list of limitations for CDR Search.
Pre-Installation Checklist
Before installing CDR Search, make sure the following is done:
• MAXCS 7.0 Update 1 ACC or ACM has been installed on the system
server.
• TCP/IP is enabled on both machines.
• The client is able to connect to the server on the network.
• The person installing CDR Search has local administrator rights on the
client system.
To install CDR Search on a Client Machine
1. Log in to the client machine using a domain account and make sure it
is connected to the network on which the system is running.
2. Exit all Windows applications.
3. Insert the MAXCS Release 7 Update 1 DVD into the drive.
4. In the CDR > CDRSearch_Client folder, run Setup.exe. Follow the
step-by-step installation instructions as they appear on the screen.
Note:
If CDR Search is running outside of a network and is used to query
internal databases, ports 10025, 10027 and 10029 need to be
opened.