ALTANA LC 4 - Manual (Page 32)

Operation BYK LC 4
32
4.9 Saving
The BYK LC 4 meter has a data memory. Up to 50 measurement datasets
can be stored in it.
A dataset consists of:
! Main measured value (conductivity, specific resistance, salinity or TDS)
! Measured temperature value
! Time and date
! ID number (0000 - 9999)
4.9.1 Saving measured data
You can save measured data as follows:
1 Open the save menu with < M>.
The memory number of the next free memory location is displayed
under the current measured value.
The
X status indicator appears.
2 Switch to the display of the ID number with < g>.
The ID number that was last entered appears on the display.
3 If necessary, edit the four-digit ID number with < 5_> and <6_>
[<ID number>].
4 Using < <> and <>>, enter the required ID number (0 ... 9999).
The selected display flashes.
5 Confirm the ID number with < g>.
6 Save the measurement dataset with < g>.
or
Cancel the storing procedure without storing by pressing <
E>.
C
MEM
CAL
RCL
TDS
CellTC
S
SAL O
2
TC
RESET
Cell
LAP
m
mbar
mg/l
CAL
LoBat Day.Month h:min min:s Ident Lap
CLR
Lin
Tref20 Tref20
M cm
k cm
Sal
1 cm
K
S/cm
ESC
1 3 1 4
0 0 1 0
Tref25
nLF
STO