ALTANA LC 4 - Manual (Page 28)

Operation BYK LC 4
28
4.5.2 Setting the linear temperature coefficient
Note
You can terminate the setting of the temperature coefficient with <
E>.
The data of the terminated setting is not used.
The temperature coefficient set before remains active.
1 Select the linear temperature compensation (Lin menu) (see section
4.5.1).
2 Open the setting of the linear temperature coefficient with < ß>.
3 Set the temperature coefficient with < <> or <>>.
4 Confirm the adjusted value with < g>.
5 Return to the measuring mode with < g>.
The adjusted temperature coefficient is used.
Cell
1 cm
Sal
mg/l
Tref20 Tref20
nLF
TDS
MEM
CAL
C
m
RCL
S
SAL O
2
TC
RESET Cell
LAP
mbar
STO
LoBat Day.Month h:min min:s Ident Lap
CLR
M cm
k cm
ESC
3 8 1
CAL
1 1 8
7
S/cm
Tref25
TC 2
K
Lin