A&D Weighing FS-30Ki - Manual (Page 9)

7
WEIGHT DATA DISPLAY.
This display shows the weight on the weighing pan.
WEIGHING UNIT INDICATOR.
This display area shows the weighing unit in use.
ANALOG WEIGHT DISPLAY.
This scale has a 60 segments analog sweep display representing zero to full
scale when the simple weighing mode display is selected. In the limit check
weighing display mode, this display shows comparison limits and results.
OVER RANGE INDICATORS.
This mark comes ON when the weight is outside the range of analog sweep
display..
COMPARISON INDICATORS.
The indicators LO (RED), OK (GREEN) and HI (YELLOW) show the results of
the weight comparison.
STABLE ANNUNCIATOR.
This annunciator will come ON when the weight reading is STABLE.
ZERO ANNUNCIATOR.
This annunciator will come ON when the scale is showing the center of ZERO.
NET ANNUNCIATOR.
This annunciator will come ON when the scale is displaying the NET weight on
the weighing pan.
PT ANNUNCIATOR.
This annunciator will come ON when the scale is displaying the preset tare
weight.
PRINT ANNUNCIATOR.
This annunciator will come ON for a moment when the scale sends out the
weight data by pressing the PRINT key or auto-printing.
PRECAUTION AGAINST LOW BATTERY.
This annunciator will come ON when the optional battery is getting close to low
battery.
KEYPAD.
A 13 key pad provides control and number keys.
1
2
3
4
5
7
8
6
9
10
11
12