Compliance, Compliance with fcc rules, Nsf listed – A&D Weighing FS-30Ki User Manual
Page 4
2
1. COMPLIANCE
Compliance with FCC rules
Please note that this equipment generates, uses and can radiate radio frequency
energy. This equipment has been tested and has been found to comply with the
limits of a Class A computing device pursuant to Subpart J of Part 15 of FCC rules.
These rules are designed to provide reasonable protection against interference
when equipment is operated in a commercial environment. If this unit is operated in
a residential area it might cause some interference and under these circumstances
the user would be required to take, at his own expense, whatever measures are
necessary to eliminate the interference.
(FCC = Federal Communications Commission in the U.S.A.)
Classification of protection provided by enclosures
The equipment is designed to comply with the IP Code of IEC 60529.
The “IP65” is explained as follows:
“IP” International
Protection.
“6”
Against ingress of solid foreign objects.
Dust-tight. No ingress of dust.
“5”
Against ingress of water with harmful effects.
Protected against water jets (no power full jets). Water projected in jets
against the enclosure form any direction shall have no harmful effects.
NSF listed
The equipment is certified and listed to NSF/ANSI Standard 169 by NSF
International. NSF International evaluated the equipment and certified that it is
compliant with food protection and sanitation requirements for the design,
construction and materials.