A&D Weighing FS-30Ki - Manual (Page 20)

18
Recalling a set of limits from memory
1. Press the RECALL key. Then the display will
show rd 00 .
2. Press the memory number, for example 3.
‰ If you stop to recall, press the C key, the scale
returns to the weighing mode.
3. Press the ENT key to recall the data from the memory.
4. The display shows a set of data for a few seconds one by one and returns to
weighing mode.
TARGET WEIGHT
(Target weight setting mode only)
HI LIMIT
LO LIMIT
WEIGHING MODE
-f rd - 00
-f rd - 03
-00 3.000
-00 0.050
-00 0.030