A&D Weighing FS-30Ki - Manual (Page 28)

26
Item Function number Description
f11- 0
Š f11- 1
Stability detection
width
f11- 2
Narrow
Wide
f12- 0
Š f12- 1
Stability detection
time
f12- 2
Short
Long
Condition to
detect stability
f13- 0 Zero tracking OFF Zero tracking
Š f13- 1 Zero tracking ON
Š f14- 0 All keys enabled
f14- 1
ON/OFF, ZERO, TARE, SAMPLE &
PRINT/ENT only enabled.
Key operation
f14- 2 ON/OFF, ZERO & TARE only enabled
Simplified
operation
available
f15- 0
f15- 1
f15- 2
f15- 3
f15- 4
f15- 5
Š f15- 6
f15- 7
Comparator light
brightness
f15- 8
Dark
Bright Brightness
control
Š f16- 0 Simple weighing display mode
f16- 1 Target weighing display mode
f16- 2 Limit check weighing display mode
Analog sweep
display when
powered on
f16- 3 Display off
f17- 0 Always OFF
Š f17- 1 Always ON
f17- 2 Turns off after 30 sec. weight stability
LCD backlight
f17- 3 Turns off after 60 sec. weight stability
Weight change
or key operation
turns on.
Š f18- 00 00 RS-232C must be set to this. Serial interface
Address
f18- ## ## = 01~99 RS-422/485
Š f19- 0 RS-232C
f19- 1 RS-422
Serial interface
f19- 2 RS-485
Optional RS-
232C/422/485
f20- 0 Reply to the command is sent.
Š f20- 1 No reply to the command.
F6-1 Serial interface
operation mode
f20- 2 UFC format F6-2, 3 or 4
Š Factory setting