KEYENCE CV-X100 Series - Manual

1
This manual describes the hardware information. Read this manual
thoroughly to understand how the CV-X100 Series works in order to
maximize the performance of the system.
• This manual is for the CV-X100 Series. All references however, unless
otherwise noted, pertain to the CV-X170F. For more details about the
differences between the models, see "Main Specifications" (page 7)
and the "CV-X Series User's Manual".
• Always keep this manual in a safe location for future reference.
• Please ensure that the manual is passed to the end user of the
controller.
Symbols
The following symbols alert you to important messages. Be sure to read
these messages carefully.
Trademarks
• "SD Memory Card" is a registered trademark of the SD Association.
• Other company names and product names noted in this document are
registered trademarks or trademarks of their respective companies.
The TM mark and ® mark are omitted in this manual.
Libraries and programs
libjpeg
Copyright ©1991-2012, Thomas G. Lane.
This software is based in part on the work of the Independent
JPEG Group.
Introduction
It indicates a hazardous situation which, if not avoided, will
result in death or serious injury.
It indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
It indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
It indicates a situation which, if not avoided, could result in
product damage as well as property damage.
It indicates cautions and limitations that must be followed during
operation.
It indicates additional information on proper operation.
It indicates tips for better understanding or useful information.
DANGER
WARNING
CAUTION
NOTICE
Important
Point
Reference
96M13187
High-speed, High-capacity
Machine Vision System
CV-X100 Series
Controller Instruction Manual
Read this manual thoroughly before using the CV-X100 Series.
Always keep this manual in a safe place for future reference.