KEYENCE XG Series - Manual (Page 7)

KEYENCE CORPORATION. Vision System Division ‐ 7 ‐ www.keyence.com
9
Do not change the settings below unless necessary. Press "OK".
10
The software automatically starts up when the installation is complete.
A screen like this should appear.
If "Error" appears in red letters, "Start Interface
after setup completes" was not checked in step 7.
In this case, the software must be reinstalled.
Next, press this button.
For reference: If you do not want the
"Connect to Server" dialog box to be displayed
again during start‐up, check the "Always
connect to this server" box.
(This box can be checked or left unchecked.)
[Important] Do not change the Server Address
or Port.