Holtgreven USED OCS-B 40,000 lb (x 20) - Manual (Page 8)

OCS User Guide
Page 5 of 24
;
The scale must be stable. Otherwise, error message will flash.
;
Current weight reading must be greater than 0 (or 0.0 or 0.00, depending on the resolution).
Otherwise, error message will flash.
;
Current weight reading must be fewer than 100% scale’s M AXIMUM C APACITY . Otherwise,
error message will flash.
;
The scale must be in gross mode. Otherwise, this action will be recognized as T ARE O UT .
Tare Out
Action
To T ARE O UT the tare weight out of scale, press TARE button on scale or on remote
controller (when the scale is in N ET M ODE ).
Function
The scale clears the tare weight, returns to gross mode, and displays all subsequent
readings in G ROSS M ODE .
The TARE indicator lights off.
The weight reading is added with tare weight.
Condition
;
The scale must not be in H OLD mode. Otherwise, error message will keep
flashing.
;
The scale must be in N ET M ODE . Otherwise, this action will be recognized as T ARE I N .
Hold
Action
To H OLD the weight reading, press HOLD button on scale or on remote controller.
Or
To unlock current reading, press HOLD button on scale or on remote controller again.
Function
The HOLD indicator lights on.
All subsequent readings are locked to current reading.
Or
The HOLD indicator lights off.
The weight reading is unlocked.
Condition
;
To H OLD the scale, it must be stable. Otherwise, error message will flash.
NOTICE:
Setting or changing TARE has no effect on the ZERO setting.
NOTICE:
Tareing will reduce the apparent overloading range of the scale.
For example, if a 1000kg container is tared and the scale maximum
capacity is 5000kg, the scale will overload at a new weight of 4009kg (5000
– 1000 + additional 9 divisions).
H OLD
T ARE O UT