Holtgreven USED OCS-B 40,000 lb (x 20) User Manual
Page 11
OCS User Guide
Page 8 of 24
Input Numerals
User’s input of numerals are required in P
ASSWORD
M
ODE
, System Setup Mode, Scale
Configuration Mode, Calibration Mode, and Tare Set function.
Action
To increase the numeral (the flashing digit), press ZERO button on scale or
on
remote controller.
To decrease the numeral (the flashing digit), press
on remote controller.
To move right the flashing digit, press TARE button on scale or
on remote controller.
To move left the flashing digit, press
on remote controller.
To confirm the numerals you input, press HOLD button on scale or
on remote
controller.
I
NPUT
N
UMERALS
This manual is related to the following products: