Holtgreven USED OCS-B 40,000 lb (x 20) - Manual (Page 7)

OCS User Guide
Page 4 of 24
After scale is completely powered up, it is ready to weigh loads.
Zero
Action
To Z ERO the scale, press ZERO button on scale or on remote controller.
Function
Scale sets current load to be Z ERO , as if it has no load.
The ZERO indicator lights on.
The weight reading turns “0”, (or “0.0” or “0.00”, depending on the resolution).
Condition
;
The scale must not be in H OLD mode. Otherwise, error message will keep
flashing.
;
The scale must be stable. Otherwise, error message will flash.
;
Current weight reading is in M ANUAL ‐Z ERO R ANGE . Otherwise, error message
will flash.
To learn more about Manual‐Zero Range, please refer to Scale Configuration function.
Tare In
Action
To T ARE I N a tare weight into scale, press TARE button on scale or on remote
controller (when the scale is in G ROSS M ODE ).
Function
The scale stores a tare weight, and shifts to N ET M ODE . All subsequent readings are
deviations from the tare value.
The TARE indicator lights on.
The weight reading turns to “0” (or “0.0” or “0.00”, depending on the resolution).
Condition
;
The scale must not be in H OLD mode. Otherwise, error message will keep
flashing.
Z ERO
T ARE I N