Holtgreven USED OCS-B 40,000 lb (x 20) - Manual (Page 12)

OCS User Guide
Page 9 of 24
6. Advanced Operation
Operations in this section feature versatile and powerful functions for crane scale measurement. Most of the
operations are accessible via dedicated remote controller. Some of the settings to the scale require password. Please
contact your local representatives for password information.
Scale’s Mode
Weighing Mode
Action
No buttons or keys are required to enter W EIGHING M ODE .
Function
W EIGHING M ODE is the default mode after the scale is turned on. In W EIGHING M ODE ,
scale detects its load, and refreshes the weight reading all the time, if the display is not Hold.
If the scale overloads, the display keeps flashing the below error message.
Gross/Net Mode
Action
To enter N ET M ODE , T ARE or T ARE S ET the scale
To enter G ROSS M ODE , Tare Out the scale.
Function
In N ET M ODE , the TARE indicator lights on.
In G ROSS M ODE , the TARE indicator lights off.
The default weight reading is in G ROSS M ODE .
View Total Mode
Action
To enter the V IEW T OTAL M ODE , press when scale is in W EIGHING M ODE .
To toggle between the low 5 digits format and the high 5 digits format, press HOLD button
on scale or on remote controller.
Function
NOTICE:
In N ET M ODE , Z ERO are disabled.
V IEW T OTAL M ODE
G ROSS /N ET M ODE
W EIGHING M ODE
S CALE ’ S M ODE