Holtgreven USED OCS-B 40,000 lb (x 20) - Manual (Page 6)

OCS User Guide
Page 3 of 24
4. Quick Start
This Quick Start introduction will guide you through these basic operations on the crane scale. To make full use of
this versatile scale, please refer to 5 Advanced Operation section.
Power On
Action
To P OWER O N the scale, press ON/OFF button on scale for 1 second.
Function
Scale goes through power‐on test, battery check and initialization.
Condition
;
Power‐on test is performed when display flashes the following characters twice. If scale
doesn’t pass the test, error message will be flashed.
Scale’s maximum capacity will be displayed on the screen. For example, the scale shows its
full capacity, 5000kg.
Battery Check is then performed. If battery works well, the screen flashes battery charge
twice.
Please flip to 7 Battery section for more information about battery recharging.
;
Finally, the screen shows detection message while scale detects its load and A UTO ‐Z ERO
itself to Z ERO status, when the A UTO ‐Z ERO function is enabled.
To learn more about Auto‐Zero function, refer to Auto‐Zero Range in Scale Configuration
function for details.
WARNING:
Scale must work at the battery voltage ranging from 6.80V to 5.80V.
Recharge the battery when needed.
P OWER O N