Hardy HI 1756-2WS - Manual (Page 88)

HI 1756-WS MANUAL
TRANSMITTER ZERO Value the transmitter puts out with the minimum
weight on the load cell.
TTL Transistor-Transistor Logic
TXD Transmit Data
UPDATE RATE Number of times per second a new weight reading is
taken.
WAVERSAVER
®
Setting to remove the effects of ambient vibration
from interfering with a weight reading. The range of
settings is to eliminate vibration at various frequen-
cies.
ZERO Weight reading once the dead load has been offset.
ZERO CALIBRATION Offset of the value of the dead load of the weight hop-
per.
ZERO TOLERANCE The number of graduations from zero that will be
accepted as zero by the instrument.
ZERO TRACK
ENABLE A bit that is set to allow the module to zero out any
accumulated product on the scale up to the Auto Zero
Tolerance setting without operator intervention.