Canon EOS Rebel XT - Manual (Page 91)

91
3 Auto Exposure Bracketing (AEB)N
¡ Follow steps 1 and 2 to set the AEB
amount to <
>.
¡ AEB will also be canceled
automatically if you turn the power
switch to <
2>, change lenses,
obtain flash-ready, replace the
battery, or replace the CF card.
Canceling AEB
AEB cannot be used with flash or bulb exposures.
¡ If the drive mode is set to continuous ( i), the three bracketed shots will
be taken continuously and then the shooting will stop automatically. If the
drive mode is set to single image (
u), you must press the shutter button
three times.
¡ If the self-timer/remote control has been set, the three bracketed shots
will be taken continuously.
¡ If C.Fn-7 [Mirror lockup] is set to [1:Enabled] (p.150), the drive mode
for AEB will be single even if it is set to continuous.
¡ AEB can be combined with exposure compensation.