Canon EOS Rebel XT - Manual (Page 22)

22
Load a fully-charged Battery Pack NB-2LH into the camera.
1 Open the battery compartment
cover.
¡ Slide the lever as shown by the arrow
and open the cover.
2 Insert the battery.
¡ Point the battery contacts downward.
¡ Insert the battery until it locks into
place.
3 Close the cover.
¡ Press the cover until it snaps shut.
When the power switch is set to <
1> (p.28), the battery level will be
indicated in one of three levels:
z : Battery level OK.
x : Battery level is low.
n
: Battery must be recharged.
Installing and Removing the Battery
Installing the Battery
Checking the Battery Level