Canon EOS Rebel XT - Manual (Page 60)

60
With just one shot, three images having a different color hue can be recorded
simultaneously. Based on the white balance mode’s color temperature, the image
will be bracketed with a blue/amber bias or magenta/green bias. This is called
white balance bracketing. It can be set up to ±3 levels in single-level increments.
1 Set the image-recording quality to
a setting other than RAW and
RAW+
7L.
(p.52)
2 Select [WB SHIFT/BKT].
¡ Select the [
m] tab.
¡ Press the <
V> key to select [WB
SHIFT/BKT], then press <
0>.
s The WB correction/WB bracketing
screen will appear.
3 Set the bracketing amount.
¡ Turn the <
6> dial to set the bracketing
direction and bracketing level.
¡ When you turn the <
6> dial, the “ ”
mark on the screen will change to
“
” (3 points). Turning the <
6>
dial to the right sets the B/A
bracketing, and turning it to the left
sets the M/G bracketing.
¡ Set the bracketing level for the B/A or
M/G bias up to ±3 levels in single-
level increments. (The bracketing
level cannot be set for both the B/A
and M/G bias at the same time.)
s On the right side of the screen, “BKT”
indicates the bracketing direction and
bracketing level.
¡ Press <
0> to exit the setting and
return to the menu.
3
White Balance Auto Bracketing
N
B/A bias ±3 levels
M/G bias ±3 levels