Doepfer A-190-4 MIDI/USB-CV/Gate/Sync Interface - Manual (Page 15)

DOEPFER System A-100 USB/Midi-to-CV/Gate A-190-4
15
4.3.5 STORE Function Sto
Save your settings permanently with the Store function:
The A-190-4 is equipped with a non-volatile memory
(EEPROM - electrically eraseable programmable read-
only memory) which will save your setup when powering
down the A-100 system. As soon as you power up the
system again, the A-190-4 will recall immediately its
saved settings.
If you change the settings of various parameters, the
A-190-4 stores these changes only temporarily, and they
will be lost when you switch off the A-100 system. To
save any changes in the set-up permanently, you have to
save the set-up by using the simple to use Store function:
This si how to save the settings of the A-190-4:
As soon as your settings are complete and you wish to
save them, please navigate to the Store function with the
”>/+“ and ”” buttons.
• Hit ”
”. The display shows no The ”>/+“ button
flashes.
• Hit “
“ again or ” 2 “ to cancel the Store function.
• Hit ”>/+“ to save the current settings permanently.
To confirm the store function, the display shows YES
for a short moment.
If desired, you may set back the A-190-4 to it’s
factory/default settings anytime (please see 4.3.6.
Initialise function).