Doepfer A-190-4 MIDI/USB-CV/Gate/Sync Interface - Manual (Page 14)

USB/Midi-to-CV/Gate A-190-4 System A-100 DOEPFER
14
divisor clocks per note note length
1 96 1/96
3 32 1/32
6 16 1/16
12 8 1/8
24 4 1/4
You may also use the A-160 clock divider
module to generate different clock divisions.
CLOCK POLARITY CPo
This Parameter sets the polarity of the clock signal at
the clock output socket.
PoS
(positive – default setting)
nEg
(negative)
For use with the A-100, select "positive". The negative
setting is provided for connection to third party / vintage
drummachines, sequencers, synths that use a negative
polarity.
4.3.4 LFO Menue lfo
The LFO menue covers all functions that are used to
configure the internal LFO. With the A-190-4, you’re
getting an extra software generated LFO which can
supplement the ‘real’ LFOs (A-145, A-146) in your A-100
system.
LFO FREQUENCY Frq
The LFO frequency parameter controls the frequency
resp. the ”speed” of the A-190-4’s built-in LFO.
The value range is from 000 (Off) to 126 (Max).
Please use your ears to dial in the desired frequency.
With a parameter value of 0, the LFO is switched off.
LFO AMPLITUDE AnP
The LFO amplitude parameter controls the amplitude
resp. the modulation depth of the A-190-4’s internal
LFO.
The value range is from 000 (Off) to 126 (Max).