Doepfer A-190-4 MIDI/USB-CV/Gate/Sync Interface - Manual (Page 10)

USB/Midi-to-CV/Gate A-190-4 System A-100 DOEPFER
10
4.3 Menues and Parameters
On the following pages you will find a detailed description
of all the A-190-4 menues and their parameters according
the overview on pages 8 and 9.
4.3.1 Note Menue not
The note menue covers all parameters that are used to
determine the properties of both generated CVs. Once
opened up by hitting ”
“, you will find nine parameters
to be accessed via ”>/+“ and ”” buttons.
MIDI CHANNEL CHN
Selects the desired MIDI Channel, on which your A-190-4
will receive MIDI data.
Channel # 1 to #15 are available – not channel
#16. The default channel is #1.
REFERENCE NOTE ref
The reference note determines the note that corresponds
to the CV1 value, adjusted with the Tune parameter.
The value range is 12 – 72.
The default value is ”C2” resp. MIDI note number
24.
PORTAMENTO por
The portamento parameter controls the duration of the
portamento in the A-190-4’s built-in glide / portamento
function.
The value range is from 000 (Off) to 100 (Max).
The default value is 000.
PITCH BEND pit
This parameter sets the pitch bend range. For example,
if you set the range to a semitone (parameter value 01),
the pitch bender of your MIDI instrument will alter the
A-100’s VCO pitch by a maximum interval of a semi-tone
up or down.
The value range is from 00 (Off) to 60 (Max).
A value of 01 bends the pitch by +/- a semitone.
A value of 12 bends the pitch by +/- one octave
(default value).