COP-USA ASH56NVIR-36S User Manual
Page 20

16
2.3.5 Motion
seting
¾
Preset header: enter the preset setting submenu.
¾
Preset number: Edit the preset number. 1~128 presets.
¾
Pic.freeze: PIC.FREEZE setting ON/OFF.(Only some series of
camera support the setting of pic.freeze).
¾
Edit the header: Edit the setting of preset header. After entering the
Edit, the display on screen is shown as figure: it is the first preset
point, with header “NO LABEL”. The PAN LEFT/RIGHT may
move the cursor, and the TILT UP/DOWN change the values, press
CLOSE to exit the Edit and save. The header of preset point has at
most 10 characters, all these characters may be 0~9, A~Z, blank
and some special characters, including:< = >?, @\+,-. / ]etc.
¾
Clear header: Clear preset header setting.
¾
Return to the previous menu.
¾
Auto scan: enter the auto scan setting submenu.
¾
Scan number: selection of line scan number. 1~3 line scan optional.
¾
Scan speed: setting of line scan speed.1~7 speed optional, each line
scan may be set individually.
¾
Setting of starting position: set the starting point of line scan
between both points, after entering, move the dome through rocker.
Press CLOSE key to store the current position and return.
¾
Setting of ending position: set the ending point of line scan between
both points, after entering, move the dome through rocker. Press
CLOSE key to store the current position and return.
¾
Running scan: run the line scan among both points. Please firstly set both starting
and ending points of line scan. If both are at the same position, the dome shall carry
out 360°line scan. Press the CLOSE key to exit.
¾
Clear scan: Clear line scan setting. Press the CLOSE key to exit.
¾
Return to the previous menu.
M O T IO N S E T U P
1 . < P R E S E T S >
2 . < A U T O S C A N >
3 . < P A T R O L S >
4 . < P A T T E R N S >
6 . < C L E A R >
7 . E D IT D O M E L A B E L
8 . R E T U R N
5 . < S C H E D U L E >
A U T O S C A N
1 . S C A N N O . :
0 1
2 . S P E E D
:
0 1
3 . S E T S T A R T L IM IT
4 . S E T E N D L IM IT
5 . R U N S C A N
6 . C L E A R S C A N
7 . R E T U R N
M O T IO N S E T U P
1 . < P R E S E T S >
2 . < A U T O S C A N >
3 . < P A T R O L S >
4 . < P A T T E R N S >
6 . < C L E A R >
7 . E D IT D O M E L A B E L
8 . R E T U R N
5 . < S C H E D U L E >
P R E S E T S
1 . P R E S E T N O . : 0 0 1
3 . E D IT L A B E L
4 . C L R L A B E L
5 . R E T U R N
2 .P IC .F R E E Z E : O N
PRESET NO. : 001
LABEL: NO LABEL