COP-USA CD58NV-MTS18 - Manual (Page 9)

6
Function Instruction
Scan
Pattern
Alarm input/output controlling function
Privacy zone masking
Lens position display
The operator can prompt set right limit and left limit in advance by keyboard and menu, so as to make the
camera repeatedly scanned between right and left limit at setting speed.
Pattern is built-in function in camera; the speed dome can record tracks that are no less than 180s, when running
pattern, the dome moves repeatedly according to the recorded tracks. A dome can set up to 4 pattern tours.
The dome receive an external alarm message, to implement the action that you pre-set, till the alarm release to
resume, if abnormity, it will send another alarm message. The dome can set up to 7 alarm input and 2 alarm
output.
The user can set a black shadow to mask the area so that it will not appear on the monitor to protect privacy.
This function is relative with the type of the dome, if zoom camera hasn't this function, it is invalid)
The position that the speed dome has finished to auto-checking as 0 point of pan movement and tilt movement.
The pan range is 0-360 , and tilt range is 0-90 . According to the displayed information, to set the position of
camera lens, and the position can display on the screen.
This functio n is decid e by the parameter of built-in camera, if the camera has not this function, this option is
invalid N/A.)
a
Tour
Auto tour is the built-in function in the speed dome, is to make preset arranged in needful order in tour queue
by programming in advance. To make camera tour between presets by inserting presets in cruise tour. It is feasible
to program tour order, each time as you run tour, you can set the park time of preset A tour can store 24 presets. .
PDF created with pdfFactory Pro trial version www.pdffactory.com