COP-USA CD58NV-MTS18 - Manual (Page 4)

1
1
Precaution
Conform to country and local electrical safety standard when using or installing the product.
The dome should be protected against extremes of pressure, vibration and humidity during storage
and transportation. It should be shipped in parts disassembled as the original packing did
. Damage caused by improper transportation is not within the warranty.
Do not install it in any other orientation. Do not squeezed structure parts, which may cause mechanical
damage. Down cover is a precise optical product. Do not touch it directly to avoid scratches which can
affect image quality.
All the service work should be done by qualif ied technicians.
Do not disassemble screws open the dome cover,
Only q ualified and authorized personnel can undertake repairs.
Don't place the camera to be shoot by strong light objects. Don't point the dome to the sun or other
bright objects when in use or not. It may affect image quality.
Electrical safety
Transportation
Installation of care
Requirements to service personnel
Do not disassemble the pan/tilt module
Environmental requirements
Don't place the camera to be shoot by strong light objects
installation
during the transportation
or and don't maintain the parts in the Pan/Tilt by
yourself.
1. Precaution
Function of waterproof
The outdoor dome has perfect function of water-proof, moisture-proof and dust-proof an d It can
reach IP66 International standard. The ind oor dome doesn't install in outdoor environment where th ere is
filled with hydrosphere. No matter Indoor dome or outdoor dome should avoid dropping which affect
element quality.
-10~+50 C
<90%
86~106Kpa
24V/1000MA 50/6 0HZ
O
Requirements for Indoor dome:
Environmental temp
Humidity
Air pressure
AC Power supply
-40~+6 0 C
<90%
86~106Kpa
24V/2500MA 5 0/60HZ
O
Requirements for Outdoor dome:
Environmental temp
Humidity
Air pressure
AC Power supply
PDF created with pdfFactory Pro trial version www.pdffactory.com