COP-USA CD58NV-MTS18 - Manual (Page 10)

7
System Setting
4. 1. 1 Current-carrying to dome and
4. 1. 2 Call
4. 1. 3
Increase
Reduce
Press TELE and WIDE at the same time, it means 3D joystick rotates joystick cap.
OPEN
CLOSE
NEAR
TELE
WIDE
.
Self-testing
the main menu
Menu and keyboard operation
Keyboard operation:
Menu operation
The dome conducts self-testing after current-carrying , and it rotates slowly until displaying pan
origin that is default setting, then moving to tilt origin, the lens is adjusted from far zoom to near zoom,
then from near zoom to far zoom, when self-testing is finished, there is relevant system information displaying
on the screen, as follow:
The information will not disappear until you stop to operate the system. If you set power up action ,
the dome will automatically activate motions after self-testing. How to operate the function? We will explain
detail introduction in following passages.
The system enters into the main menu by calling 95 preset or by calling 9 preset twice within 3 seconds
and inputing password. All the menu setting must enter into the main menu at first.
when choosing pictures, it means to increase Iris; when setting menu, it means to enter into the
next menu or setting, or means to save after setting
when choosing pictures, it means to reduce Iris; when setting menu, it means to exit without
saving setting.
Focus to near
magnification
magnification
Joystick to up: When choosing menu, it means to choose the former one; when choosing picture, it
means camera tilt up.
Joystick to down: when choosing menu, it means to choose the next one; when choosing picture, it
means camera tilt down.
Joystick to left: when choosing menu, it is equal with CLOSE , when choosing picture, it means camera
tilt left
Joystick to right: when choosing menu, it is equal with OPEN , when choosing picture, it means
camera tilt right.
BACK : Back to the former menu
EXIT : Exit to menu
ON : Open some setting
OFF : Close some setting
.
Soft edition
Protoco l
Dome ID
Commun ication parameter
4. 1 Basic operation
4. System setting
S/N of the dome
PDF created with pdfFactory Pro trial version www.pdffactory.com