Checkline MLT - Manual (Page 9)

25
english
Measuring the machine speed
Connect the MLT WESCO to the revolution sensor.
Apply a short press to the rotary knob to access the
"selection menu":
MACHINE SPEED
YARN LENGTH
YARN TENSION
YARN SPEED
Turn the rotary knob to the right or left until "MACHINE
SPEED"
lashes on the display.
Press the rotary knob. The "MACHINE SPEED" menu
is selected.
"MEASURE"
lashes on the display.
Press the swivel arm release handle and keep it
pressed. The measurement is started.
"MEASURE"
lashes on the display and the " " symbol
lashes upon each machine revolution.
Furthermore, the display shows dots running from the
left to the right during the measuring process until the
machine speed is displayed.
Operation
The machine speed is shown in "rpm" on the dis-
play.
Displaying the last or the penultimate
measured value
Turn the rotary knob to select "MEM" on the display.
The last measured value is automatically displayed.
Press the swivel arm release handle again and keep
it pressed. The penultimate value is displayed.