Checkline MLT - Manual (Page 10)

26
Operation
Measuring the yarn length
Connecting the MLT WESCO to the revolution sen-
sor.
Apply a short press to the rotary knob to access the
"selection menu":
MACHINE SPEED
YARN LENGTH
YARN TENSION
YARN SPEED
In the "selection menu", turn the rotary knob to select
"YARN LENGTH" on the display.
Apply a short press to the rotary knob, the "YARN
LENGTH"
selection is conirmed.
Catch the yarn with the help of the swivel arm.
Press the swivel arm release handle and keep it
pressed. The measurement is started.
The yarn length is shown on the display, e.g. in "m/1
machine revolution".
NOTE!
The yarn length to be measured can be
measured within the range of 1 - 100 machine
revolutions.
Setting the number of machine revo-
lutions to be measured
Access the "SETUP" menu by turning the rotary knob.
Conirm your selection (by pressing the rotary knob).
"REVS", "SETUP" and the number of revolutions to
be measured is displayed within the lashing.
Select the number of machine revolutions to be
measured (e.g. 3) by turning the rotary knob.
Apply a short press to the rotary knob to conirm your
selection.
The measuring process can now be started.
Displaying the last or the penultimate
measured value
Turn the rotary knob to select "MEM" on the display.
The last measuring value is automatically displayed.
Press the swivel arm release handle again and keep
it pressed. The penultimate value is displayed.
i