Checkline MLT - Manual (Page 11)

27
english
Operation
Selecting the Yarn Tension measu-
ring modes
Apply a short press to the rotary knob to access the
"selection menu":
MACHINE SPEED
YARN LENGTH
YARN TENSION
YARN SPEED
In the "selection menu", turn the rotary knob to select
"YARN TENSION" on the display.
Apply a short press to the rotary knob.
In the "selection menu", turn the rotary knob to select
"SETUP" on the display.
Apply a short press to the rotary knob.
The selection menu is displayed:
normal
average
peak
The set mode, e.g. "normal"
, lashes on the dis-
play.
normal = The currently measured yarn tension is
displayed.
average = The average yarn tension value throug
hout the entire measuring time is display-
ed.
peak = The highest measured yarn tension (peak
value), which is displayed. The peak
tension display value will alter according
to peak values measured.
Select the respective setting by turning the rotary knob.
The setting, e.g. "normal"
, lashes on the display.
Apply a short press to the rotary knob to conirm your
selection.