Checkline MLT - Manual (Page 15)

31
english
Maintenance
The following instructions must be observed:
The batteries must not be opened or thrown into
a ire.
Replaced batteries must be appropriately disposed
of.
The rechargeable batteries must exclusively be
charged with the supplied original charger unit.
Depending on the local supply voltage, only the
supplied charger (110 to 230 V) may be used for
charging the batteries.
The optimum battery charging temperature range
lies between 10° and 35° C. Cooler or higher tem-
peratures would impair the batteries' quality.
The battery poles must not be short-circuited.
The batteries and the charger must be stored in a
cool and dry place.
With longer storage periods, the batteries may be
subject to self-discharge.
The batteries must be recharged when the LO and
BATT is alternatingly displayed.
They must be recharged by means of the supplied
charging unit until Full is shown on the display
and the running display has come to a
halt.
The batteries' duration cannot be guaranteed if the
charging process is interrupted prematurely.
ATTENTION!
Change of batteries only while MLT WESCO
is off.
Plug the DC connection cable into the MLT WES-
CO.
Plug the charger into a Schuko socket by means
of an adapter.
Battery duration:Approx. 50 hours of normal use.
Cleaning the MLT WESCO
The MLT WESCO may only be cleaned with the help
of a moist cloth.
ATTENTION!
No chemical cleaning agents must be
used.
NOTE!
Before using the MLT WESCO for the irst time, or if it hasn't been used for a while, the unit has to be
charged.
i
!
!