Operation, Threading, Starting the measuring process – Checkline MLT User Manual

Page 8

NOTE!
During the measuring process, the MLT WESCO
must be held still and straight.

ATTENTION!
The measuring process is stopped as soon
as the swivel arm release handle is released

or no longer pressed.

NOTE!
The measuring process must be repeated for
further measurements.

Operation

Threading

Engage the yarn on the roller with the help of the swivel

arm.

Starting the measuring process

Press the swivel arm release handle. The arm then

swivels into the measuring position together with the
yarn. In this position the yarn is automatically positioned
over the tension force sensor.

Press the swivel arm release handle to the limit stop

and keep it pressed. The measurement is started.

The measured value in units of the preset system of

measurement (e.g. m or inch per revolution) is shown
on the display.