Checkline MST - Manual (Page 14)

14
- Press the RECALL key.
The DISPLAY blinks, showing
26
Peak cN
the maximum peak value of the measuring
period, the PEAK indicator and the symbol.
- Press the RECALL key.
The DISPLAY blinks, showing
19
Peak cN
the minimum peak value of the measuring
period, the PEAK indicator and the symbol.
- Press the RECALL key.
The tension meter switches back to measuring mode.
The DISPLAY shows
3
cN Mem
MEM and the current reading.
The tension meter is ready for a new measuring period. The previously stored tension
values will then be overwritten with new values.
3.4.1 Recalling the Stored Tension Values (Cont.)
3.4.2 Clearing the MST Memory
3.4.3 Memory Function HOLD
When the tension meter memory is empty, you can retain the last reading on the
DISPLAY by using the memory function HOLD.
To retain the last reading:
- Press the RECALL / HOLD key for approx. one second.
The DISPLAY shows
2 3 8
: .
cN
the last reading and the “:” colon symbol.
To switch back to measuring mode:
- Press the RECALL / HOLD key for approx. one second.
The tension meter switches back to measuring mode.
If values are stored in the MST memory, the
DISPLAY shows e.g. with the MEM indicator.
To clear the memory:
- Simultaneously press the MEM and RECALL keys.
The DISPLAY shows e.g.
3
cN
; all values stored in the memory have been
deleted.