Checkline 6000TCX Series - Manual (Page 9)

10
New Batch
Memory Management Memory Management
Memory
The PosiTector 6000 can record measurements in memory for
printing, transfer to a computer or synchronizing with
PosiTector.net. Readings are time-stamped as they are taken.
Closes open batch and creates a new batch name using the next
higher number. For example, if only Batch 1 and Batch 3 exist,
then Batch 4 would be created and made the current batch. The
icon appears and basic statistics are displayed. Each
measurement will be displayed and stored into this new batch. On-
screen statistics are immediately updated with each measurement.
New batch names are date stamped at the time they are created.
Shortcut:
Standard models store up to 250 readings in one group. The
following appears within the Memory menu:
On: turns memory on and begins recording
Off: stops recording (stored readings remain in memory)
Clear:
removes all readings from memory
View: lists all stored readings on the display. It will begin by
showing the last several measurements. Use the Up and Down
buttons to page through all readings
Advanced models store 100,000 readings in up to 1,000
batches (groups). The following appears within the Memory menu:
When a batch is open, press (+) to create a new batch
New Sub-Batch (appears only if a batch is currently open)
Creates a new sub-batch within the currently opened batch.
When a sub-batch is open, create a new sub-batch by
pressing (+)
Shortcut:
In the following example, B2s2 is a sub-batch of Batch 2. Sub-
batching allows the user to group related batches so that statistics
W