Checkline 6000TCX Series - Manual (Page 13)

14
Immediately initiates synchronization with PosiTector.net when
connected (USB or Bluetooth) to an internet connected PC run-
ning PosiTector Desktop Manager (pg.4).
Sync Now
Connect
Connect Menu Connect Menu
The Gage uses a USB mass storage device class which provides
a simple interface to retrieve data in a manner similar to USB flash
drives, cameras or digital audio players.
When the "USB Drive" option is selected with a tick mark , any
computer can view and download measurements stored in
memory (in batches) by navigating a virtual drive labeled
“PosiTector” using the included USB cable.
A formatted HTML report is viewed by selecting the "index.html"
file found in the root directory. Optionally, text ".txt" files located in
each batch folder provide access to measurement values. Stored
readings and graphs can be viewed or copied using universal
PC/Mac web browsers or file explorers. The "logo.jpg" file can be
replaced with a corporate logo.
USB ü
Auto Sync ü
Allows the Gage to automatically synchronize with PosiTector.net
when connected (USB or Bluetooth) to an internet connected PC
running PosiTector Desktop Manager (pg.4).
Additional measurements added to memory while
connected are synchronized only when the USB cable is
unconnected, then reconnected or when Connect>Sync Now is
selected.
NOTE:
ü
While the USB cable is connected to a computer, new
measurements will not be included in reports and text files until the
USB cable is unconnected and then reconnected.
NOTE:
W
W
W