Checkline R55 - Manual (Page 9)

Plug & Test
TM
Smart Force & Torque Sensors User’s Guide
8
7 SERIES R04 FORCE SENSORS
7.1 Unpacking and Assembly
Carefully remove the sensor from the box. Extra care should be taken
for very low capacity models. No assembly is required.
7.2 Overview
Tension and compression force may be applied to the surfaces with
threaded holes. Attachments may be threaded into these holes.
Finger-tighten only. These holes also allow for mounting as required.
7.3 Specifications
Accuracy:
±0.2% of full scale
Safe overload: 200% of full scale
Operating temperature: 40ºF – 100ºF [5ºC – 38ºC]
Operating humidity:
96% max. (non-condensating)
Weight: 0.015 lb [0.007 kg]
7.4 Dimensions
(in[mm])
0.30 [7.6]
0.85 [21.2]
0.32 [8.1]
0.20 [4.7]
0.63 [16.0]
0.60 [15.2] 0.75 [19.1] 5 FT [1.5m] LONG
#4-40 UNC
0.110 [2.8] DEEP
X2
0.65 [16.5]
Ш0.13 [3.2] Ш0.08 [2.1]
7.5 Capacity x Resolution
Model
No.
With Model 7i / 5i Indicator With Model 3i Indicator
lbF ozF gF kgF N mN lbF gF kgF N
MR04-025 0.25 x 0.0001 4 x 0.002 100 x 0.05 - 1 x 0.0005 1000 x 0.5 0.25 x 0.0002 100 x 0.1 - 1 x 0.001
MR04-05 0.5 x 0.0002 8 x 0.005 250 x 0.1 - 2.5 x 0.001 2500 x 1 0.5 x 0.0005 250 x 0.2 - 2.5 x 0.002
MR04-2 2 x 0.001 32 x 0.02 1000 x 0.5 1 x 0.0005 10 x 0.005 - 2 x 0.002 - 1 x 0.001 10 x 0.01
MR04-5 5 x 0.002 80 x 0.05 1000 x 0.5 2.5 x 0.001 25 x 0.01 - 5 x 0.005 - 2.5 x 0.002 25 x 0.02
MR04-10 10 x 0.005 160 x 0.1 5000 x 2 5 x 0.002 50 x 0.02 - 10 x 0.01 - 5 x 0.005 50 x 0.05
MR04-20 20 x 0.01 320 x 0.2 10000 x 5 10 x 0.005 100 x 0.05 - 20 x 0.02 - 10 x 0.01 100 x 0.1
MR04-50 50 x 0.02 800 x 0.5 25000 x 10 25 x 0.01 250 x 0.1 - 50 x 0.05 - 25 x 0.02 250 x 0.2
MR04 -100 100 x 0.05 1600 x 1 50000 x 20 50 x 0.02 500 x 0.2 - 100 x 0.1 - 50 x 0.05 500 x 0.5
OK NOT OK