Checkline R55 User Manual
Page 2
Plug & Test
TM
Smart Force & Torque Sensors
User’s Guide
1
Thank you…
Thank you for purchasing a Mark-10 Plug & Test
TM
remote sensor, designed for use with Mark-10 models
7i, 5i and 3i force/torque indicators.
With proper usage, we are confident that you will get many years of great service with this product. Mark-
10 sensors are ruggedly built for many years of service in laboratory and industrial environments.
This User’s Guide provides setup, safety, and
operation instructions for each individual sensor
series. Instructions for using models 5i and 3i
indicators are available in their respective user’s
guides. For additional information or answers to your
questions, please do not hesitate to contact us. Our
technical support and engineering teams are eager to
assist you.
Before use, each person who is to use Mark-10
sensors and indicators should be fully trained in
appropriate operation and safety procedures.
TABLE OF CONTENTS
OVERVIEW ..................................................... …2
SAFETY / PROPER USAGE ..............................3
SETUP ................................................................4
SERIES R01 FORCE SENSORS .......................5
SERIES R02 FORCE SENSORS .......................6
SERIES R03 FORCE SENSORS .......................7
SERIES R04 FORCE SENSORS .......................8
SERIES R05 FORCE SENSORS .......................9
SERIES R50 TORQUE SENSORS ..................10
SERIES R51 TORQUE SENSORS ..................12
SERIES R52 TORQUE SENSORS ..................14
SERIES R53 TORQUE SENSORS ..................15
SERIES R54 TORQUE SENSORS ..................16
SERIES R55 TORQUE SENSORS ..................17