Checkline R55 - Manual (Page 8)

Plug & Test
TM
Smart Force & Torque Sensors User’s Guide
7
6 SERIES R03 FORCE SENSORS
6.1 Unpacking and Assembly
Carefully remove the sensor from the box. Extra care should be taken for very
low capacity models. No assembly is required.
6.2 Overview
Tension and compression force may be applied to the threaded holes in the load
cell shaft and opposite flat surface. Attachments may be threaded into these
holes. Finger-tighten only. These holes also allow for mounting as required.
6.3 Specifications
Accuracy:
±0.15% of full scale
Safe overload: MR03-025 – MR03-2: 200% of full scale
MR03-5 – MR03-100: 150% of full scale
Operating temperature: 40ºF – 100ºF [5ºC – 38ºC]
Operating humidity: 96% max. (non-condensating)
Weight: 0.4 lb [0.2 kg]
6.4 Dimensions
(in[mm])
24.0 [610] RETRACTED LENGTH
#10-32 X2
0.16 [4.1]
2.50 [63.5]
0.31 [7.9]
Ø 0.44 [11.2]
2.06 [52.3]
1.83 [46.5]
0.81 [20.6]
6.5 Capacity x Resolution
Model
No.
With Model 7i / 5i Indicator With Model 3i Indicator
lbF ozF gF kgF N mN lbF gF kgF N
MR03-025 0.25 x 0.0001 4 x 0.002 100 x 0.05 - 1 x 0.0005 1000 x 0.5 0.25 x 0.0002 100 x 0.1 - 1 x 0.001
MR03-05 0.5 x 0.0002 8 x 0.005 250 x 0.1 - 2.5 x 0.001 2500 x 1 0.5 x 0.0005 250 x 0.2 - 2.5 x 0.002
MR03-2 2 x 0.001 32 x 0.02 1000 x 0.5 1 x 0.0005 10 x 0.005 - 2 x 0.002 - 1 x 0.001 10 x 0.01
MR03-5 5 x 0.002 80 x 0.05 2500 x 1 2.5 x 0.001 25 x 0.01 - 5 x 0.005 - 2.5 x 0.002 25 x 0.02
MR03-10 10 x 0.005 160 x 0.1 5000 x 2 5 x 0.002 50 x 0.02 - 10 x 0.01 - 5 x 0.005 50 x 0.05
MR03-20 20 x 0.01 320 x 0.2 10000 x 5 10 x 0.005 100 x 0.05 - 20 x 0.02 - 10 x 0.01 100 x 0.1
MR03-50 50 x 0.02 800 x 0.5 25000 x 10 25 x 0.01 250 x 0.1 - 50 x 0.05 - 25 x 0.02 250 x 0.2
MR03-100 100 x 0.05 1600 x 1 50000 x 20 50 x 0.02 500 x 0.2 - 100 x 0.1 - 50 x 0.05 500 x 0.5